Skip to content
ZAP Help Center

Palworld: Max Players per Guild

Learn how to change the player limit per guild in Palworld by adjusting the max players per guild setting on your server. -> Find out more now

10 November 20263 min read0 Views0 helpful

Introduction

Palworld allows you to control how many players can join a single guild on your server. In this guide, you'll learn how to manually change the maximum player limit per guild by editing the correct configuration file in your ZAP-Hosting game server management.

Edit the Max Players per Guild Setting

In the PalWorldSettings.ini file, look for the configuration line OptionSettings. The guild player limit is controlled by the key GuildPlayerMaxNum.

Configuration Value

Use the following setting to specify the maximum number of players per guild:

ini
GuildPlayerMaxNum=[your_value]

Replace [your_value] with the number of players you want to allow per guild.

Default and Example Values

Configuration KeyDescriptionDefault Value
GuildPlayerMaxNumMaximum number of players per guild20

For example, if you want to allow up to 30 players per guild, set:

ini
GuildPlayerMaxNum=30
Info

Edit Existing OptionSettings Line In Palworld, server settings are usually stored in a single OptionSettings=(...) line. You should change the existing GuildPlayerMaxNum value in this line instead of adding a second entry.

Example Snippet

Your configuration might look like this:

ini
[/Script/Pal.PalGameWorldSettings]
OptionSettings=(GuildPlayerMaxNum=30)

If your file already contains many settings in OptionSettings=(...), only change the GuildPlayerMaxNum part and leave the other values unchanged.

Warning

Avoid Duplicate Keys Do not add GuildPlayerMaxNum multiple times in the same configuration block. Duplicate keys can cause unexpected behavior or make it unclear which value the server uses.

Save and Apply Changes

After editing:

  1. Save the changes in PalWorldSettings.ini
  2. Restart your Palworld server

A restart is required for the new guild player limit to be loaded by the server.

ActionRequired
Save PalWorldSettings.iniYes
Restart serverYes
Additional console commandNo confirmed command necessary
Tip

Restart Required The updated max players per guild value will not apply immediately while the server is running. You must fully restart the server after saving the configuration.

FAQ

Frequently asked questions

Edit the GuildPlayerMaxNum value in the PalWorldSettings.ini via the Configuration tab (raw text view) in your game server management.
The PalWorldSettings.ini file, accessible through the Configuration tab (raw text view) in your ZapX game server management. The relevant key is GuildPlayerMaxNum (maximum players per guild).

Feedback

Was this article helpful?

Your feedback helps us prioritize and improve content.

0 of 0 Users found this article helpful.

Personal support

Need more help than the guide provides?

Our ZAP support team knows your product — briefly describe your issue and we'll help you personally.