Skip to content

Palworld: Change Day-Night Speed

Learn how to change the day and night speed in Palworld by adjusting the day cycle settings on your server. -> Learn more now

10 November 20263 min read0 Views0 helpful

Introduction

Palworld allows you to adjust the speed of the day and night cycle on your server. In this guide, you will learn how to change the day and night speed by editing the correct configuration file in the ZAP-Hosting game server management and applying the changes properly.

Edit the day and night speed

In the PalWorldSettings.ini file, you will find the gameplay configuration entries for day and night speed.

You need to adjust the following values:

Config KeyDefault ValueDescription
DayTimeSpeedRate1.000000Controls how fast the day passes
NightTimeSpeedRate1.000000Controls how fast the night passes

Higher values make time pass faster, lower values slow down the passage of time.

Example configuration

If you want day and night to pass faster, you can set higher values like this:

ini
DayTimeSpeedRate=2.000000
NightTimeSpeedRate=2.000000

If you want a longer day but a faster night, you can use different values, for example:

ini
DayTimeSpeedRate=0.500000
NightTimeSpeedRate=2.000000

Where to enter the values

Palworld stores many gameplay settings in the OptionSettings section of the PalWorldSettings.ini file. You should edit the existing entries for DayTimeSpeedRate and NightTimeSpeedRate there and avoid adding duplicate keys elsewhere.

A typical section looks like this:

ini
[/Script/Pal.PalGameWorldSettings]
OptionSettings=(DayTimeSpeedRate=1.000000,NightTimeSpeedRate=1.000000,ExpRate=1.000000,PalCaptureRate=1.000000)

After editing, it might look like this:

ini
[/Script/Pal.PalGameWorldSettings]
OptionSettings=(DayTimeSpeedRate=2.000000,NightTimeSpeedRate=1.500000,ExpRate=1.000000,PalCaptureRate=1.000000)
Warning

Edit existing entries carefully Make sure to only change the value after DayTimeSpeedRate= and NightTimeSpeedRate=. Do not remove commas, parentheses, or other existing settings in the OptionSettings line, as incorrect formatting can prevent the server from loading the configuration correctly.

Save and apply changes

After adjusting the values in PalWorldSettings.ini, save the file in the Configuration tab.

Then restart your Palworld server so the new day cycle settings take effect.

ActionRequired
Save PalWorldSettings.iniYes
Restart serverYes
Execute additional console commandsNo
Tip

Restart required Configuration changes to Palworld world settings only apply reliably after a server restart. Always restart the server after changing the day or night speed.

Configuration overview

Use the following table as a quick reference if you want to change the day settings again later.

SettingExampleResult
DayTimeSpeedRate=0.500000Slower dayDay lasts longer
DayTimeSpeedRate=2.000000Faster dayDay passes faster
NightTimeSpeedRate=0.500000Slower nightNight lasts longer
NightTimeSpeedRate=2.000000Faster nightNight passes faster
Info

Balanced settings For a more natural gameplay experience, avoid extremely high values. Very fast day and night cycles can make farming, exploring, and base management difficult.

FAQ

Frequently asked questions

Edit the corresponding values in PalWorldSettings.ini via the Configuration tab (raw text view) of your game server management. Higher values make time pass faster, lower values slow it down – the default is 1.000000.
The PalWorldSettings.ini file, accessible through the Configuration tab (raw text view) in your ZapX game server management. The relevant keys are DayTimeSpeedRate and NightTimeSpeedRate (speed of the day and night cycle).

Feedback

Was this article helpful?

Your feedback helps us prioritize and improve content.

0 of 0 Users found this article helpful.

Personal support

Need more help than the guide provides?

Our ZAP support team knows your product — briefly describe your issue and we'll help you personally.

Zappy knows this guide and answers you right in the chat.