Skip to content

Dedicated Servers: Locations and Delivery Time

Dedicated servers in Frankfurt / Eygelshoven, Dallas, Ashburn, and Los Angeles: processors by location, up to 512 GB of memory, delivery time, and setup status → Read now

21 November 20263 min read2 Views0 helpful

Introduction

At ZAP-Hosting, you can rent dedicated servers in Europe and the USA. This guide explains which processors are available at each location, how much memory you can get, when your server will be ready, and where to check its setup status.

The shop always shows you which combinations are currently available to order and how much they cost. First, choose the processor and location, then configure the memory, SSD storage, and network.

Locations

Dedicated servers are available at four locations:

LocationRegionProcessors
Frankfurt / EygelshovenEuropeIntel Xeon Gold 6142, 6244, 6248, 6252, Intel Xeon Platinum 8164, Intel Xeon E5 v4, AMD Ryzen 7 9700X, AMD Ryzen 9 9950X
DallasUSAIntel Xeon Gold 6142, 6244, 6248, 6252, Intel Xeon Platinum 8164
AshburnUSAIntel Xeon Gold 6142, 6244, 6248, 6252, Intel Xeon Platinum 8164
Los AngelesUSAIntel Xeon Gold 6142, 6244, 6248, 6252, Intel Xeon Platinum 8164
Info

Servers with Intel Xeon E5 v4 and AMD Ryzen are only available at the Frankfurt / Eygelshoven location. It’s best to choose a location close to your users, as you can’t switch locations with the click of a button later (see the questions below). The Locations guide shows you how fast your connection is to each location.

Processors and memory

  • One or two processors: Intel Xeon Gold 6142, 6248, 6252, and Intel Xeon Platinum 8164 are available with one or two processors at all four locations. The Intel Xeon Gold 6244 is only available with one processor. For Intel Xeon E5 v4, the E5-2640v4 and E5-2650v4 are also available to order with two processors. AMD Ryzen always comes with one processor.
  • Memory with one processor: Up to 256 GB. Intel servers use DDR4, while AMD Ryzen servers use DDR5.
  • 384 GB and 512 GB: Only available with two processors (DDR4). Some memory slots can only be used with the second processor. If you select 384 or 512 GB with one processor in the shop, a notice will appear and the shop will switch your configuration to two processors.
  • SSD storage: NVMe SSD for Intel Xeon Gold, Intel Xeon Platinum, and AMD Ryzen; SATA SSD for Intel Xeon E5 v4.
  • Network: 10 Gbit/s for all Intel servers, including those in the USA, and 25 Gbit/s for AMD Ryzen.

Delivery time

For each selection, the shop shows whether suitable hardware is available immediately or whether we’ll build your server after you order:

  • Available immediately: The hardware is ready. Setup starts automatically once your payment has been received.
  • Provisioned after ordering: We’ll build your server after you place your order. It’s usually ready within 5 days. This applies to all locations, including Dallas, Ashburn, and Los Angeles.

If a similar configuration is available immediately, the shop will also suggest it. You can decide whether to choose it.

Info

You don’t need to do anything after placing your order. Setup starts automatically as soon as the hardware is ready. The delivery time is an estimate, not a guaranteed date.

Check your setup status

  1. Immediately after you place your order, the order confirmation shows the status of your dedicated server.
  2. Later, you’ll find the server under My services. Open it.
  3. The Setup progress card shows how far along the setup is. The steps are called Hardware reserved, Network prepared, Setting up server, Preparing management, and Ready for handover.
  4. Under Booked configuration, you can see the processor, memory, storage, uplink, and location for your order.

Once the server is active, full management will become available. The Initial setup and Dashboard overview guides explain what to do next.

FAQ

Frequently asked questions

Not with the click of a button. A dedicated server is a physical machine in a specific data center. To use a different location, order a new server there and transfer your data. So choose a location that suits your users when you place your order.
“Usually within 5 days” is an estimate, not a guaranteed date. Your order remains active, and setup starts automatically once the hardware is ready. You don’t need to do anything. You can check the current status in the Setup progress card under My services. If it takes significantly longer, contact our support team and we’ll look into your order.
No. If the hardware is ready, setup starts automatically once your payment has been received. If we need to build the server after you order, setup will also start automatically as soon as it’s ready.

Feedback

Was this article helpful?

Your feedback helps us prioritize and improve content.

0 of 0 people found this article helpful.

Personal support

Need more help than the guide provides?

Our ZAP support team knows your product — briefly describe your issue and we'll help you personally.

Zappy knows this guide and answers you right in the chat.