Is your Over The Top: WWI game server not behaving as expected? Don't worry, most problems are easy to fix yourself. This guide covers the most common issues, their causes, and what you can do about them. For individual game settings, we'll point you to the relevant guide.
You can narrow down most problems by checking the console. Lines containing [ott-entrypoint] show what your server prepares during startup. Lines containing [render-ott-serverinfo] and [render-ott-config] show which values from the startup parameters are written to the configuration files.
Over The Top: WWI is available as a Windows server. We run it on Linux using a compatibility layer, which you'll notice most during the first startup.
The first startup takes longer
During the first startup, your server sets up its runtime environment. You'll see Initializing Wine prefix in the console. It then creates the configuration files in the config folder and starts the game. After starting the server, wait one or two minutes before joining.
The server won't start or shuts down immediately
Check the console to see where the startup process stops.
- If you see a line containing
Starting Over The Top: WWI dedicated server, your server has finished preparing and has started the game. If it stops after that, the cause is usually in the game settings. If you recently changed theServerConfiguration.ini, try reverting the change. - If the console warns about insufficient memory, there isn't enough RAM available. See Performance below for more information.
For instructions on connecting through the server browser or directly using Own IP, see Connect to the server.
The server doesn't appear in the server browser
- Check the Overview to see if your server is online. After starting or restarting, it takes a short while to appear in the list.
- Search the server browser for part of your server name and refresh the list.
- In the meantime, connect directly: click Own IP in the server browser and enter the IP address and port from the Overview in the format
IP:Port.
Joining is interrupted or times out
- Different versions: The game and server must be on the same version. Update your game in Steam. After a game update, it may take a little while for the update for your server to become available, too. When it's ready, ZapX will show the Update available notice when you open your server. Click Apply update to install it.
- Incorrect port: Use exactly the IP address and port shown in the Overview. The port may differ from the game's default port.
- The server is changing maps: When you join, your game downloads the current map from the server. If the map or round has just changed, simply try again.
If joining keeps getting stuck even though your server is online and appears in the list, contact our support team. We'll also check whether DDoS protection is incorrectly filtering connections to your port.
Your password isn't accepted
- Check your capitalization.
- Passwords can be no longer than 20 characters.
- Set the password in the Server password field under Startup parameters in the Configuration tab. If the field is empty, your server is open to everyone.
- Restart your server after changing the password. The new password only takes effect after a restart.
The console is read-only in Over The Top: WWI. You manage your server as an admin directly in the game.
I can't become an admin
- Admin password: ZapX automatically creates an admin password when you place your order. You'll find it in the Admin password field under Startup parameters in the Configuration tab. When joining, enter it in the Password field instead of the server password.
- Password is too long: The game allows a maximum of 20 characters. If your admin password is longer, change it to 20 characters or fewer under Startup parameters and restart your server.
- Whitelist enabled: If Enable whitelist is turned on, a password alone is no longer enough. Only players whose Steam ID is listed in
Whitelist.txtwill get admin rights. If the list is empty, no one can become an admin. For instructions on adding entries, see Configure the whitelist.
For the “Proby” and “Senior” admin levels, your server sets random passwords at startup unless you enter your own. You can find the current values for ProbyAdminPassword and SeniorAdminPassword in the ServerInfo.ini file in the config folder.
The whitelist is enabled, but anyone can still join
That's expected. In Over The Top: WWI, the whitelist is an admin list, not a restriction on who can join. If you want to allow only certain players on your server, set a server password and share it only with your fellow players. You can ban disruptive players using the ban list. For more information, see Configure bans & moderation.
The basic settings are in the Startup parameters section of the Configuration tab. All other settings are in the config folder: game rules are in ServerConfiguration.ini, and server identity settings are in ServerInfo.ini.
My changes don't take effect or have disappeared
- No restart: Changes to the startup parameters and files in the
configfolder only take effect after a restart. - Value is overwritten at startup: Every time your server starts, it writes
ServerName,MaxPlayerCount,ServerPassword,AdminPassword, the ports, and the IP address from the startup parameters toServerInfo.ini. The same applies toWhiteListIsEnabledinServerConfiguration.ini. Always change these values under Startup parameters. - Line was deleted: If the console shows a message such as
WARNING: field 'ServerName' not found, the line is missing from the file. Your server can't set the value in that case. Add the line back in the formatServerName = Value, for example using Edit directly in the Configuration tab, and restart your server.
All other values in the two files are preserved after restarts.
The ban list, map rotation, or word filter is lost
The Whitelist.txt, Banlist.txt, TempBanlist.txt, MapRotation.txt, and BannedWords.txt lists are stored in the config folder. They are preserved during updates and included in your backups.
- Keep the file names in
ServerConfiguration.iniset to their defaults, for exampleBanPathstring = Banlist.txt. If you use a different name or path, the list will no longer be in theconfigfolder. - The game only creates
BannedWords.txton the first startup. Your server then moves it to theconfigfolder, and uses it from there from the next startup onward.
Where do I configure each setting?
We have separate guides for the game rules, including:
Smooth server performance is essential for a good gaming experience. In Over The Top: WWI, large numbers of bots and large battles are especially demanding. Keep an eye on usage in the Statistics tab.
Lag or stuttering with many players and bots
- Bots: Your server has to calculate the actions of every bot. If you experience lag, lower the
AttackerBotsandDefenderBotsvalues or let real players replace bots withSubBotForPlayer = 1. For more information, see Configure bots. - Performance profile: Use
TargetFPSand the navigation values to tune your server for high player counts. For more information, see Optimize server performance. - Long runtimes: Schedule regular server restarts in the Schedules tab at a time when no one is playing.
System requirements are not met
The performance your server needs depends heavily on the number of players and bots. During the ordering process, ZAP-Hosting provides a recommended minimum configuration. If usage remains consistently high in the Statistics tab even after adjusting the bots and performance settings, the easiest way to improve stability is to upgrade using the button in the Overview.
Network issues can cause lag, delays, or disconnections. There are many possible causes, but they can usually be resolved with the right settings and security measures.
Ping spikes and network delays
Ping spikes and delays often happen when your server is reaching its limits, for example, because there are too many bots. So first check usage in the Statistics tab. Choosing a server location close to your players can also reduce latency.
If you suspect routing issues or external network problems, don't hesitate to contact our support team. We'll help you analyze the situation and find the best solution.
DDoS and other network threats
Game servers are sometimes targeted by attacks, especially Distributed Denial of Service (DDoS) attacks. These flood the server with an extremely large amount of traffic, causing lag, connection loss, or even complete downtime. ZAP-Hosting automatically protects your server against common and advanced attacks. You can view past attacks in the DDoS Manager. If you suspect an attack, contact our support team.
Regular backups can save you a lot of stress and hassle. Create backups regularly so you can restore an older, working version if something goes wrong. We already back up your game server automatically every day. With the ZapX Pass, you can also create your own backups at any time and restore them with a click. ZapX Pass Pro can even create backups automatically on your own schedule. Learn more in our guide to Backups.
Always create a backup before making major changes to ServerConfiguration.ini. That way, you can quickly revert if a setting doesn't work as expected.
Still having problems after troubleshooting? Our support team is here for you every day. Simply start a support chat in your ZapX customer account and describe your issue in as much detail as possible, ideally including an excerpt from the console. We'll investigate as soon as possible and help you resolve it!
With these tips, you can resolve the most common problems with your Over The Top: WWI server yourself. For an overview of all areas of your server, see our Dashboard overview. If you have more questions or need help, our support team is available every day! 🙂