Skip to content

Insurgency: Sandstorm: Server Configuration

Learn how to set your Insurgency: Sandstorm server name, startup map, and scenario, and where to find MapCycle.txt, Admins.txt, and Game.ini.

19 November 20263 min read5 Views0 helpful

Don't have your own server yet? Host your Insurgency: Sandstorm server with ZAP-Hosting.

Introduction

With the right configuration, your Insurgency: Sandstorm game server starts with the name, map, and scenario you want. In this guide, we'll show you which settings you can configure directly in ZapX, which map and scenario combinations work, and where to find your server's configuration files.

How the configuration works

Your server receives its most important settings as startup parameters when it starts. You can find them in ZapX under the Configuration tab, in Startup Parameters. Other settings are stored in files that you can edit under the Files tab.

After you save your changes, ZapX will prompt you to restart the server. Your changes only take effect after the restart.

Startup parameters at a glance

Startup parameterDescription
Server nameThe name of your server in the server list. Default: ZAP-Hosting Insurgency: Sandstorm Server
Startup mapThe map your server starts with. Default: Precinct
ScenarioThe scenario on this map. It must match the map. Default: Scenario_Precinct_Checkpoint_Security

You currently can't set the maximum number of players, a server password, or a Steam Game Server Login Token (GSLT) as a startup parameter in ZapX. Learn more about GSLTs in Create a GSLT.

Important

When your server starts, it automatically removes certain characters: spaces, ?, #, and " from the Startup map and Scenario, and double quotation marks " and line breaks from the Server name. The Console will display a notice when characters have been removed. It's best to avoid using these characters.

Choose a map and scenario

Maps and scenarios always go together. The scenario for Checkpoint mode follows this format:

Scenario_<Szenario>_Checkpoint_Security or Scenario_<Szenario>_Checkpoint_Insurgents

The suffix determines which side the players are on: Security or Insurgents.

Warning

For some maps, the map name differs from the scenario name. If you enter an unknown map, your server will start on Farmhouse with the Scenario_Farmhouse_Range scenario and won't show an error. If the scenario doesn't match the map, the round won't start. Always check both fields.

These combinations work for Checkpoint:

Map in gameStartup mapScenario (Security example)
BabBabScenario_Bab_Checkpoint_Security
CitadelCitadelScenario_Citadel_Checkpoint_Security
CrossingCanyonScenario_Crossing_Checkpoint_Security
FarmhouseFarmhouseScenario_Farmhouse_Checkpoint_Security
ForestForestScenario_Forest_Checkpoint_Security
GapGapScenario_Gap_Checkpoint_Security
HideoutTownScenario_Hideout_Checkpoint_Security
HillsideSinjarScenario_Hillside_Checkpoint_Security
HoldHoldScenario_Hold_Checkpoint_Security
Last LightLastLightScenario_LastLight_Checkpoint_Security
MinistryMinistryScenario_Ministry_Checkpoint_Security
OutskirtsCompoundScenario_Outskirts_Checkpoint_Security
Power PlantPowerPlantScenario_PowerPlant_Checkpoint_Security
PrecinctPrecinctScenario_Precinct_Checkpoint_Security
PrisonPrisonScenario_Prison_Checkpoint_Security
RefineryOilfieldScenario_Refinery_Checkpoint_Security
SummitMountainScenario_Summit_Checkpoint_Security
TellTellScenario_Tell_Checkpoint_Security
TrainyardTrainyardScenario_Trainyard_Checkpoint_Security

For the Insurgents side, replace Security at the end with Insurgents, for example, Scenario_Hideout_Checkpoint_Insurgents with the startup map Town.

Set the map

  1. Open Startup Parameters under the Configuration tab.
  2. Enter the map from the table under Startup map, for example, Town.
  3. Enter the matching scenario under Scenario, for example, Scenario_Hideout_Checkpoint_Security. Make sure to use the correct capitalization.
  4. Save your changes and restart your server.

Configuration files

Under the Files tab, you'll find two areas with settings. Both are retained across restarts and updates.

ServerConfig folder: map rotation and admins

The ServerConfig folder corresponds to your server's Insurgency/Config/Server folder. It contains the lists that Insurgency: Sandstorm reads when it starts:

  • MapCycle.txt: Add other game modes such as Push, Firefight, or Skirmish, as well as a map rotation, here. Your server reads this file without requiring an additional startup parameter.
  • Admins.txt: Add the Steam IDs of players who should receive admin permissions here.

If either file doesn't exist yet, create it in the ServerConfig folder under the Files tab. New World Interactive's official server admin guide explains the exact format for entries in both files.

Game.ini and Engine.ini

Your server's game rules are stored in Game.ini, while technical settings are stored in Engine.ini. After the first startup, you'll find both files in the Saved/Config/LinuxServer folder.

Important

Insurgency: Sandstorm rewrites Game.ini when the server shuts down. Stop your server before editing the file, save your changes, and then start the server again. Otherwise, the server may overwrite your changes the next time it shuts down.

Tip

Back up Game.ini, Engine.ini, or MapCycle.txt before making major changes. That way, you can always restore the last working version.

Conclusion

Your Insurgency: Sandstorm server is now set up the way you want it. For instructions on connecting to it, see Connect to the server. If something isn't working as expected, our Common issues guide can help. If you have any other questions, our support team is available every day! 🙂

FAQ

Frequently asked questions

Set the server name, startup map, and scenario under Startup Parameters in the Configuration tab. Map rotation and admins are managed in MapCycle.txt and Admins.txt in the ServerConfig folder, while game rules are in Game.ini in the Saved/Config/LinuxServer folder.
The startup map you entered is unknown. Some maps have a different map name than their scenario name, such as Town for Hideout or Oilfield for Refinery. Enter the map name shown in the table in this guide.
The scenario usually doesn't match the startup map. Check both fields in the startup parameters, for example, use startup map Town with scenario Scenario_Hideout_Checkpoint_Security.

Feedback

Was this article helpful?

Your feedback helps us prioritize and improve content.

0 of 0 people found this article helpful.

Personal support

Need more help than the guide provides?

Our ZAP support team knows your product — briefly describe your issue and we'll help you personally.

Zappy knows this guide and answers you right in the chat.