You can host a Space Engineers server on your own VPS with ZapX. You have full control over the system, and with the Game Server Installer, you can set up the server in just a few minutes without a remote desktop connection. This guide explains what you need, how to install the server, and how to manage your Space Engineers server afterward.
| Requirement | Space Engineers |
|---|---|
| Operating system | Windows Server 2019 or newer |
| RAM | at least 4 GB |
| Free disk space | at least 15 GB on drive C: |
Space Engineers is only available for Windows in the Game Server Installer. If your VPS runs Linux, install a Windows Server template via Settings > Reinstallation. This deletes all data on your VPS. For more information, see Server Reinstallation.
- Open your VPS in the ZapX dashboard and go to the Tools tab. Select the Game Server Installer.
- Under Your server's operating system, select the Windows tile.
- Under Choose game, search for Space Engineers and select it.
- Under Set up server, configure the Server name and Player slots. You can find the Game port under Advanced settings.
- Click Install on this VPS, then click Start installation.
The installer downloads the Space Engineers server via SteamCMD (around 8 GB), sets it up, and starts it. For details on the installation process, see the Game Server Installer guide.
When it starts for the first time, the server creates the Star System world with planets, moons, and asteroids. This takes a few minutes. Players can connect only after it is finished.
You can also install Space Engineers yourself using a command: copy the command shown in the last step, connect via Remote Desktop, and run it in Windows PowerShell as an administrator.
When the installation is complete, the installer shows your server address under How to connect. If you install the server from the dashboard, the installer does not set a join password. To set one, install using a command; the script will prompt you for it without displaying it. To connect, open Join Game > Servers in the game and search for your server by name. Alternatively, connect directly using your VPS IP address and the port, which is 27016 by default. You can also find the IP address in the Overview of your VPS in the ZapX dashboard.
Your server files are located on the VPS under C:\ZapX-GameServers\space-engineers\:
| Folder/file | Contents |
|---|---|
server\DedicatedServer64\ | Space Engineers server files |
data\SpaceEngineers-Dedicated.cfg | Server settings, admins, and mods |
data\Saves\World\ | Your world and its settings (Sandbox.sbc, Sandbox_config.sbc) |
data\SpaceEngineersDedicated_*.log | Server log |
logs\server.log | Server output |
Your Space Engineers server starts automatically when the VPS boots and restarts after a crash. To manage it, connect via Remote Desktop and use the desktop shortcuts:
Space Engineers (space-engineers) - StartSpace Engineers (space-engineers) - StopSpace Engineers (space-engineers) - Restart
The Stop shortcut saves the world first, then shuts down the server cleanly.
Space Engineers settings are stored in data\SpaceEngineers-Dedicated.cfg. For example, you can add admins (Administrators), mods (Mods), and a Steam group as a whitelist (GroupID) there. Stop the server before editing the file, then start it again afterward. For details, see Space Engineers: Become a Server Admin, Space Engineers: Install Mods, and Space Engineers: Whitelist.
The installer rewrites the server name, ports, player slots, and join password every time it runs, including when you update the server. So change these values through the installer: select Space Engineers again, adjust the settings, and click Update. The installer also adds the player slots to your existing world settings (data\Saves\World\Sandbox_config.sbc), because an existing world uses its own settings.
The installer enables the game's Remote API, but only locally on the VPS. It uses the API to save the server cleanly and shut it down when stopping. Do not change the RemoteApi... and RemoteSecurityKey entries.
Updates are not installed automatically. To update, open the Game Server Installer again and select Space Engineers. The installer detects the existing installation and displays Update. Alternatively, use the Space Engineers (space-engineers) - Update shortcut on the VPS. Your settings and world will be preserved.
| Port | Protocol | Use |
|---|---|---|
| 27016 | UDP | Game |
The installer opens these ports in the Windows Firewall. If you start the installation from the dashboard, it also opens them in your VPS's Network Firewall. If you installed using a command, check the ports there yourself. Space Engineers needs only this one port. The server uses the Steam port and Remote API internally, so they are intentionally not opened.
Use the Space Engineers (space-engineers) - Backup shortcut to back up your worlds and SpaceEngineers-Dedicated.cfg as a ZIP file under C:\ZapX-GameServers\_backups\space-engineers\. Use Space Engineers (space-engineers) - Restore to restore a backup.
Your entire VPS is also backed up automatically every day. With an active ZapX Pass, you can restore these backups yourself and create your own backups. For more information, see Daily Backups, Restores, and Restricted Actions.
Your Space Engineers server is now running on your VPS. To learn how to become an admin, see Space Engineers: Become a Server Admin. If you have questions or need help, our support team is here for you every day! 🙂