Skip to content

Subsistence: Server Configuration

Learn how to configure your server name, passwords, player limit, difficulty, hunters, PvP, and base decay for your Subsistence game server → Find out more

17 November 20264 min read2 Views0 helpful

Introduction

With the right configuration, you can turn your Subsistence game server into exactly the server you have in mind: with your own name, password, player limit, difficulty, and rules for hunters, PvP, and abandoned base decay. In this guide, we’ll show you which settings are available, where to find them in ZapX, and what you can adjust directly in the configuration file.

How configuration works

Subsistence stores its server settings in the file Config/UDKDedServerSettings.ini. However, you don’t need to change the most important settings manually there: you’ll find them in ZapX under the Configuration tab, in Startup parameters.

Whenever your server starts, it writes the values from the startup parameters to Config/UDKDedServerSettings.ini. All other entries in the file stay as you configured them.

Important

Always change values that are available as startup parameters in Startup parameters, not in the file. Any changes made in the file will be overwritten with the values from the startup parameters the next time the server starts.

After you save, ZapX will offer to restart the server. Your changes will only take effect after the restart.

Startup parameters at a glance

Startup parameterDescription
Server nameThe name of your server in the in-game server list, up to 64 characters. Default: ZAP-Hosting Subsistence Server
Server descriptionA short description players see when they select your server in the server list, up to 256 characters.
Hosted By NameThe name of the person or organization hosting the server, up to 64 characters. This name appears in the Steam server list and in the live status on your Overview page. Default: ZAP-Hosting.com
Server passwordPassword required to join. Leave this blank for an open server.
Admin passwordPassword admins use to sign in to your server. If you leave this field blank, your server will generate one the first time it starts.
Max. playersThe number of players who can be on your server at the same time, from 1 to 32 (default: 8). The game does not technically allow more than 32 players.
Difficultyeasy, normal (default), or hardcore.
Hunters Enabledtrue (default): AI hunters that build their own bases are present on your server. false: no hunters.
Hunter AttacksHow hunters attack: 0 (default) for normal attacks, 1 for revenge attacks only, 2 for no attacks.
Pvp Damagetrue (default): players can damage other players. false: players cannot damage each other.
Base Decay HoursThe number of real-world hours a player and their team must be offline before their base starts to decay. 0 (default) disables decay. The game recommends setting a value on public servers, such as 96 for four days.

Admin password

Use the Admin password to sign in as an admin on your server in-game. If you leave the Admin password field blank, your server will generate a random password the first time it starts and keep using it afterward. You can find it in the Files tab, in the AdminPassword entry in Config/UDKDedServerSettings.ini.

To set your own admin password, enter it in the Admin password field, save, and restart your server.

Warning

Only share the admin password with players you trust. Also, use a different password from your Server password.

Other settings in UDKDedServerSettings.ini

The following settings are not available as startup parameters. You can change them in the Files tab, directly in Config/UDKDedServerSettings.ini, in the [ColdGame.ColdDedServerSettings] section. The file contains a short comment above each entry explaining its value.

EntryDescription
ProfileIdSave slot from 1 to 5. This lets you keep multiple separate save games on one server. Default: 1
DaysPerYearIn-game days per in-game year: 12, 24, 36, 48, 60, 90, 120, 200, or 365.
MonthOverrideStarts the server in a specific month once (0 = January through 11 = December). The game then resets the value to -1.
ModsComma-separated list of mods for the game to enable. Use the mod UUID or Steam Workshop ID for each entry.
PlayersCanDamagePlayerBasestrue: players can damage other players’ structures.
OfflineBaseProtectiontrue: bases are protected while all their residents are offline. Protection starts 10 minutes after they log off and does not prevent base decay.
PlayersCanAccessEnemyPlayerBaseItemstrue: players can use chests and devices in other players’ bases.
AllowBuildableClippingtrue: building pieces can overlap when placed.
Warning

It’s best to edit Config/UDKDedServerSettings.ini while your server is stopped, then start it again. Leave the other files in the Config folder unchanged; your server manages them automatically.

Conclusion

Congratulations, you’ve successfully configured your Subsistence server! Our guide Connect to the server explains how to join your server, and you can find help with issues in Common issues. Our support team is available every day if you have any other questions or need help! 🙂

FAQ

Frequently asked questions

Go to the Configuration tab and select Startup parameters. There you can set Server name, Server description, Hosted By Name, Server password, Admin password, Max. players, Difficulty, Hunters Enabled, Hunter Attacks, Pvp Damage, and Base Decay Hours. Other settings are in Config/UDKDedServerSettings.ini.
If you left the Admin password field blank, your server generated a password the first time it started. Find it in the AdminPassword entry in Config/UDKDedServerSettings.ini under the Files tab. To use your own password, enter it in the Admin password field.
Set Base Decay Hours to the number of real-world hours a player must be offline before their base starts to decay—for example, 96 for four days. Set it to 0 to disable decay.

Feedback

Was this article helpful?

Your feedback helps us prioritize and improve content.

0 of 0 Users found this article helpful.

Personal support

Need more help than the guide provides?

Our ZAP support team knows your product — briefly describe your issue and we'll help you personally.

Zappy knows this guide and answers you right in the chat.