Skip to content

Operation: Harsh Doorstop: Server Configuration

Learn how to configure the map, game mode, player count, AI bots, admins, RCON, and Steam Workshop mods for your Operation: Harsh Doorstop game server → Find out more

17 November 20265 min read0 Views0 helpful

Introduction

With the right configuration, you can turn your Operation: Harsh Doorstop game server into exactly the server you have in mind: your own map and game mode, AI bots for the teams, admins, RCON, and mods from the Steam Workshop. In this guide, we’ll show you which settings are available, where to find them in ZapX, and what you can adjust directly in the files.

How configuration works

You’ll find the basic settings in ZapX under the Configuration tab, in Startup parameters. Your server applies these values each time it starts: it passes the map, game mode, player count, bots, and server name directly to the game at startup, and writes the password, RCON, and admin settings to the configuration files in the Saved/Config/LinuxServer folder.

After you save, ZapX will prompt you to restart the server. Your changes won’t take effect until you restart it.

Startup parameters at a glance

Startup parameterDescription
Server nameThe name of your server in the server list, up to 63 characters. Default: ZapX Harsh Doorstop Server
Server passwordPassword required to join. Leave blank for an open server. No spaces, ?, or quotation marks.
Starting mapThe map your server starts with, such as Risala, Khafji, or Montecassino. Maps with _Skirmish_ in their name are Skirmish layouts of a map. Default: Risala
Custom map (Mod)Short name of a map from a mod, such as Tarnokhiv. If this field is filled in, your server starts with this map instead of the Starting map.
Game modeauto (default): uses the map’s mode; Skirmish maps automatically run as Skirmish. You can also choose aas (Advance and Secure), skirmish (Skirmish), or tdm (Team Deathmatch).
Max. playersThe number of players who can play at the same time. Default: 32, up to 64 are supported.
BLUFOR botsNumber of AI bots on the BLUFOR team, from 0 to 64. Default: 0
OPFOR botsNumber of AI bots on the OPFOR team, from 0 to 64. Default: 0
Admin Steam IDsSteamID64s for players with admin permissions, separated by commas.
RCON PasswordPassword for the remote console (RCON). Leave blank to keep RCON disabled. No spaces or quotation marks.

Map and game mode

Choose one of the official maps from the list in the Starting map field. To play a specific Skirmish layout, select the corresponding map with _Skirmish_ in its name, such as Montecassino_Skirmish_Castle. If the Game mode is set to auto, your server detects Skirmish maps automatically.

The MapCycle.cfg file determines which maps follow each match, with one map per line. Your server creates this file with the official maps the first time it starts. It won’t change the file afterward, so you can edit it as needed in the Files tab.

Bots

Use BLUFOR bots and OPFOR bots to fill the teams with AI bots, for example, 4 and 4. This makes a match fun even when there are only a few players.

Info

The bots only join the game once the first player is on your server. Until someone connects, the server waits for the round to start.

Assign admins

As an admin, you can use admin commands on your server. To add admins:

  1. Find your SteamID64. It has 17 digits and starts with 7656.
  2. Enter it in the Admin Steam IDs field. Separate multiple IDs with commas.
  3. Save and restart your server.

When your server starts, it adds the IDs to the Saved/Config/LinuxServer/Admins.cfg file, one ID per line. Invalid entries are skipped, and a message is written to the console.

Info

Admins added in this field are added at startup, but never removed. To revoke a player’s admin permissions, remove their ID from the Admin Steam IDs field and delete their line from Admins.cfg in the Files tab. Then restart your server.

RCON

RCON lets you control your server remotely, for example, with the command-line tool rcon-cli. Operation: Harsh Doorstop uses the Source RCON protocol over TCP.

  1. Enter a secure password in the RCON Password field.
  2. Save and restart your server.
  3. Your server only enables RCON and opens the RCON port after restarting. You can find the IP address in your server’s Overview, and the RCON port under More ports.

If you clear the field, your server disables RCON the next time it starts.

Steam Workshop mods

Operation: Harsh Doorstop supports mods from the Steam Workshop. Your server downloads them automatically at startup. Players download the mods automatically when they join; they don’t need to subscribe to them beforehand.

  1. Open the mod in the Steam Workshop and copy its Workshop ID. This is the number after ?id= in the link.
  2. In ZapX, open the Workshop tab and add the ID under Add Workshop items in the Item IDs field. You can add up to 20 mods.
  3. Restart your server. The mods are downloaded the next time it starts.

The mods appear in the Files tab in the Mods folder, with each mod in its own subfolder. If you remove a mod in the Workshop tab, your server deletes its folder the next time it starts.

Tip

You can also upload mods manually. To do so, place the mod’s folder directly in the Mods folder, so the .uplugin file is located at Mods/<Modname>/<Modname>.uplugin. Mods uploaded manually are left untouched when your server syncs with the Workshop.

Play maps from mods

If a mod includes its own maps, enter the map’s short name in the Custom map (Mod) field, for example, Tarnokhiv. You can usually find the map name in the mod’s Steam Workshop description. The mod must be installed on your server. If you clear the field, your server starts with the Starting map.

Additional files

In the Files tab, you’ll find other configuration files in the Saved/Config/LinuxServer folder:

  • Admins.cfg: admins for your server, one SteamID64 per line
  • MapCycle.cfg: map rotation, one map per line
  • Bans.cfg: banned players
  • Whitelist.cfg: your server’s whitelist
  • Game.ini: additional game settings. Your server overwrites the server password and RCON settings in this file at every startup with the values from the Startup parameters.
Important

Always change settings that are available as startup parameters in Startup parameters, not in the files. Any change made in a file will be overwritten the next time the server starts with the value from the startup parameters.

Conclusion

Congratulations, you’ve successfully configured your Operation: Harsh Doorstop server! Our guide Connect to the server shows you how to join your server, and you can find help with issues in Common issues. Our support team is available every day if you have any other questions or need help! 🙂

FAQ

Frequently asked questions

Go to the Configuration tab and open Startup parameters. There you can set the server name, password, startup map, custom mod map, game mode, max. players, bots for each team, admin Steam IDs, and RCON password. Find additional settings in the Saved/Config/LinuxServer folder.
In Startup parameters, set the desired number of BLUFOR bots and OPFOR bots, from 0 to 64 for each team. Save and restart the server. The bots join the game once the first player is on the server.
Enter the mod’s Workshop ID in the Item IDs field in the Workshop tab. You can add up to 20 mods. Restart the server to download them; players download the mods automatically when they join.

Feedback

Was this article helpful?

Your feedback helps us prioritize and improve content.

0 of 0 Users found this article helpful.

Personal support

Need more help than the guide provides?

Our ZAP support team knows your product — briefly describe your issue and we'll help you personally.

Zappy knows this guide and answers you right in the chat.