Skip to main content

VPS: IP Configuration (Windows)

The ideal products for this guide

Get started right away — order the matching product and follow this guide step by step.

VPSfrom 7.90€

Introduction​

Configuring IP addresses on your Windows VPS allows you to control how your server communicates within the network. This includes assigning IP addresses, defining the default gateway, and configuring DNS servers required for network connectivity.

Correct IP configuration is important for servers running services such as game servers, web servers, databases, or remote access systems, as it ensures stable network communication and reliable accessibility.

Server unreachable due to missing internet connection?

In case your server becomes unreachable due to an incorrect network configuration or missing internet connection, remote access via RDP may no longer work. Use the VNC console in the web interface to connect to your server and fix the network configuration.

Preparation​

Before configuring IP addresses, ensure you have the following information available:

  • IP address you want to assign
  • Subnet mask
  • Default gateway
  • DNS servers

This information can be found in the web interface. To do this, open your VPS management and navigate to IP addresses.

Configuration​

Connect to your VPS using Remote Desktop (RDP). Once connected, open the Control Panel. Navigate to Control Panel → Network and Internet → Network and Sharing Center.

Click on Change adapter settings on the left side. You will see the available network interfaces. Right-click your active network adapter (usually Ethernet) and select Properties. In the list, select Internet Protocol Version 4 (TCP/IPv4) and click Properties.

img

Choose Use the following IP address and enter the required values:

  • IP address → Your assigned IP address
  • Subnet mask → Your subnet mask
  • Default gateway → Your gateway
  • DNS servers → 1.1.1.1, 8.8.8.8

Then configure the DNS servers by selecting Use the following DNS server addresses and entering your preferred DNS servers. After entering all values, confirm the configuration with OK and close the remaining windows.

Verification​

To verify the configuration, open Command Prompt and run:

ipconfig

img

This command displays all network interfaces and their current IP configuration. Look for your active network adapter and check that the IPv4 Address matches the IP address you configured earlier. If the correct IP address appears, the configuration has been successfully applied.

Conclusion​

Congratulations! You have successfully configured the IP settings on your Windows VPS. If you have further questions or need assistance, our support team is available daily to help you.

Cookie settings