Skip to main content

Palworld: Increase XP

Introduction​

Palworld allows you to adjust gameplay multipliers through its server configuration, including the amount of XP players gain. In this guide, you will learn how to increase the XP rate on your ZAP-Hosting Palworld server by editing the correct configuration file and applying the changes properly.

Preparation​

Before you begin, make sure you have access to your Palworld game server through the ZAP-Hosting web interface and permission to edit its configuration files.

Configuration Access Requirement

You need access to your server's web administration to edit configuration files under the Configs section. If you cannot access the server administration, check your product access in the ZAP-Hosting panel first.

Locate the configuration file​

To increase XP on your Palworld server, you need to edit the PalWorldSettings.ini file.

In the ZAP-Hosting game server administration:

  1. Open your Palworld server.
  2. Navigate to the Configs section.
  3. Open the file PalWorldSettings.ini.

This file contains the main gameplay settings used by the Palworld dedicated server, including the XP multiplier.

Edit the XP multiplier​

The setting responsible for XP gain is ExpRate.

Find the correct setting​

Open PalWorldSettings.ini and look for the OptionSettings line or the section where gameplay multipliers are defined.

The relevant configuration entry is:

ExpRate=1.000000

Change the value​

Adjust the value of ExpRate to the multiplier you want to use.

Config keyDefault valueExample valueEffect
ExpRate1.0000002.000000Double XP gain
ExpRate1.0000003.000000Triple XP gain

For example, to enable double XP, set:

ExpRate=2.000000

To enable triple XP, set:

ExpRate=3.000000
Recommended Value Format

Palworld server settings commonly use decimal values such as 1.000000 or 2.000000. Using the same format helps keep the configuration consistent and easier to read.

Example configuration​

Depending on your current file contents, the setting will usually appear inside the OptionSettings block. For example:

[/Script/Pal.PalGameWorldSettings]
OptionSettings=(Difficulty=None,DayTimeSpeedRate=1.000000,NightTimeSpeedRate=1.000000,ExpRate=2.000000,PalCaptureRate=1.000000)

If ExpRate is already present, only change its value. If it is missing, add ExpRate=[your_value] inside the existing OptionSettings=(...) block.

Edit the Existing OptionSettings Block Carefully

Do not create multiple OptionSettings entries unless your current configuration specifically requires it. In most cases, you should only edit the existing OptionSettings=(...) line and change the ExpRate value there.

Save and restart the server​

After changing the XP multiplier:

  1. Save the changes in PalWorldSettings.ini.
  2. Restart your Palworld server from the ZAP-Hosting server administration.

A restart is required because Palworld does not apply this gameplay setting change immediately while the server is already running.

ActionRequired
Save PalWorldSettings.iniYes
Restart the serverYes
Run additional console commandsNo
No Additional Commands Required

For this setting, no extra in-game command or console command is normally required. The new XP rate is applied after the server restart.

Verify the new XP rate​

Once the server is back online, join the server and perform an action that grants XP, such as defeating enemies, capturing Pals, or completing normal gameplay activities.

If the XP gain does not seem to change:

  • re-open PalWorldSettings.ini
  • confirm that ExpRate is present in the OptionSettings block
  • verify that the value is written correctly, such as 2.000000
  • make sure the server was fully restarted after saving
Avoid Invalid Configuration Syntax

If you accidentally remove commas, brackets, or other values from the OptionSettings=(...) line, the server may ignore the setting or fail to load the configuration correctly. Always review the full line before saving.

Conclusion​

Congratulations, you have successfully increased the XP gain rate on your Palworld server. For further questions or assistance, please don't hesitate to contact our support team, which is available daily to assist you!

Cookie settings