Skip to main content

FiveM: Use Rcon

This guide was created with the following products:

(Details may vary with products from different providers but the main concepts remain the same)

Introduction

Rcon is a protocol for executing commands on the server without having direct access to the console.

Preparation

A suitable Rcon tool is required for the use. For example, the well-known Rcon tool Icecon can be used for this. This example is based on Icecon. The tool can be set up by downloading and executing the icecon_windows_amd64.exe.

An additional installation is not required. The program can be started right away. To establish the connection, the information about the IP address, port and rcon password is required.

Configuration

The rcon password can be defined in the server config. The value of the following command must be adjusted for this:

rcon_password "YourDesiredRconPassword"

Usage

Once the password has been defined and the server has been restarted, the rcon connection can be established. To do this, complete the two fields IP:Port and Password (Rcon) with the information from your server and click on "OK".

The connection will be established afterwards and you can now execute your desired commands there!

Conclusion

Provided that you have followed all the steps, you have successfully configured and used the rcon feature. For further questions or assistance, please don't hesitate to contact our support team, which is available daily to assist you! 🙂